Wednesday, 3 June 2015

PRESTIGE TX4 = AVANTI TX4 & STYLE, AIRPORT, CENTURION DOORS, MATADOOR & SUPERLIFT TX4 REPLACEMENT

PRESTIGE TX4
The PRESTIGE TX4 REMOTE features a chromed metal body with a robust black plastic body that is screwed together.  Four milky & numbered buttons are perfectly placed for easy use & a LED shows button press.  A sliding "Button Protector" saves battery usage & accidental openings.  Electronically the same as the remote it replaces, we think this is a better option!Using 64 Bit encryption, this rolling code remote gives 3 billion possible codes, maximising your security.  We provide "Easy To Pair" instructions for your garage doors and or gates. Not compatible with any other brand remotes. Shown here with the "Button Protector" open.

AVANTI STYLE


Frequency - 433.92MHz 
Coding - Rolling Code 
Body Type - Key-Ring
Buttons - 4
Button Colour - White
Case Colour -  Black & ChromeRemote Size - 56 x 30 x 14mm



AIRPORT TX4 - AVANTI TX4 - CENTURION TX4
MATADOOR TX4  - SUPERLIFT TX4




PRESTIGE TX4 REPLACES THE REMOTES SHOWN

For more info on this remote go to :-
http://www.retro-remotes.com/prestige-tx4








CODING VIDEOS - https://youtu.be/paxQLvbimnchttps://youtu.be/hKX6BFL-3_w

CODE LEARNING

Remotes may be coded as follows; i. If needed hinge the Courtesy Lamp Cover open to expose the “Learn or Code Set Button otherwise it is on the rear of the motor head.ii. Decide which button of the new remote will control the openeriii. Momentarily press the "Learn or Code Set Button (* LED Indicator will glow solid)iv. Momentarily press the New Remote button you want to control the door - LED indicator will extinguishv.  Momentarily press the same Remote button again - LED indicator will begin to flash rapidly, programming is complete once the LED Indicator ceases to flashvi. If required close the Courtesy Lamp Cover

CODE DELETING All Remote codes may be deleted as follows; 
i.   If needed hinge the Courtesy Lamp Cover open to expose the “Learn or Code Set Button otherwise it is on the rear of the motor head.ii. Momentarily press the "Learn or Code Set” Button - LED indicator will glow solidiii. Press and hold the black "Run" Button - LED indicator will begin to flash rapidlyiv. All Remote Codes will have been deleted once the LED Indicator ceases to flashv.  If required close the Courtesy Lamp Cover


2 comments: