Saturday, 6 June 2015

PRESTIGE NOVIS = BFT MITTO 2, 4 & 4B

PRESTIGE NOVIS
The PRESTIGE NOVIS remote features a chromed metal body with a robust Black plastic body that is screwed together.  Four white buttons are perfectly placed for easy use & a LED shows button press. 

A sliding "Button Protector" saves battery usage & accidental openings.  Electronically the same as the remote it replaces, we think this is a better option!

Using 64 Bit encryption, this rolling code remote gives 3 billion possible codes, maximising your security.
Shown here with the "Button Protector" open. Not compatible with any other brand remotes. 
For more info on the PRESTIGE NOVIS remote go to - 
http://www.retro-remotes.com/prestige-novis

CODING VIDEOS - https://youtu.be/J2YPK37QjgMhttps://youtu.be/wfMSIiMKMIkhttps://youtu.be/0CadRdEPx3I
THIS REMOTE REPLACES - BFT MITTO 2, 4 & 4B









BFT MITTO 2 & 4 CODING


PLEASE NOTE:-  New BFT Mitto 2 transmitters do not have a hidden button. BFT MITTO 2 & 4 - Press both buttons 1 & 2 at the same time. Secret Buttons on the PRESTIGE NOVIS are buttons 3 & 4, which are closest to the key-ring attachment.

CODING VIA AN EXISTING REMOTE
Locate a Remote already coded to device - Be within 3m of the gate control box

Original Remote: Press hidden button on back of remote with a pin or paper clip or press B1 & B2 together until remote LED lights

Original Remote: Momentarily press button that opens device

New Remote: Press hidden button on back of remote with a pin or paper-clip or press B1 & B2 together until remote LED lights

New Remote: Press the button you want to operate device - Wait for device to reset & test - Repeat for as many remotes required - Coding Complete

CODING VIA RECEIVER LCD SCREEN

PLEASE NOTE
: At least one Remote must be already coded to device
Press Programming Button – Red Button 3 - Twice Using Red Button 2 - Scroll Down (Red Button 1 = Scroll Up) to the Radio (RADio) menu item

Press OK = Red Button 3 Menu shows Start – Press OK = Red Button 3 Menu says Hidden Button

Press hidden button on back of Original Remote with a pin or paper-clip - Or press B1 & B2 together until remote LED lights Menu will show Released – Then Desired Press the button on the New Remote you want to activate the device until menu says OK.

Menu moves to add Press OK = Red Button 3 And repeat for further remotes Or, Press Red Button 1 & 2 buttons together to end

Note: Some equipment supplied by selected stockiest may be totally electronically programmed. The receiver will only pair with transmitters that have been coded with this device. If you cannot code the remotes, then they must be programmed by a BFT supplier using a special computer based programming tool

No comments:

Post a Comment